SmartConnect 2018

Web Service Request Log

Requests made to the SmartConnect web service may be logged in the SmartConnect web service request log. All information pertinent to the request is stored in the log, and as such failed request may be re-run from this logging window.

As per request security, request logging may be set up standard across multiple request or individually for specified requests.

To enable the SmartConnect web service request log:

1.	Log into the SmartConnect client as an administrator.

2.	Select the Web Security button on the Setup tab.

3.	Select the Logging tab.

4.	Select the checkbox beside the required request to enable logging for that request.

5.	Select either 'Use Standard Logging' or 'Specify Logging' as required.

Web Service Log Settings for RunMap

6.	If standard logging is selected, select the Define Standard Logging button to set up logging. If Specify Logging is selected, select the configuration button to specify logging settings.

7.	Enter the required settings on the logging setup screen.

8.	Select OK to save changes to the setup screen.

9.	Select OK to save changes to the security window.

To view the SmartConnect web service security log:

1.	Log into the SmartConnect client as an administrator.

2.	Select the Request Logs button from the Logs tab.

3.	Enter selection criteria if required, then select the Refresh Query Button.

Web Service Request Logs

To re-run a SmartConnect web service request that has failed, and been logged in the request log:

1.	Log into the SmartConnect client as an administrator.

2.	Select the Request Logs button from the Logs tab.

3.	Enter the selection criteria if required and then select the Refresh Query button.

4.	Select the request to be re-run then select the Re-Run Requests button

Note: multiple requests may be re-run at once.

To remove SmartConnect web service request logs:

Manually

1.	Log into the SmartConnect client as an administrator.

2.	Select the Request Logs button from the Logs tab.

3.	Select criteria if required then select the Refresh Query button.

4.	Select the row(s) to be removed, then select the Delete Selected button.

5.	Confirm the deletion.

Automatically

1.	Log into the SmartConnect client as an administrator.

2.	Select the Web Security button on the Setup tab.

3.	Select the Logging tab.

4.	Select the configuration button for either standard or specific logging settings.

5.	Fill out the required details for clearance of request logs.

6.	Select OK to close the settings screen.

7.	Select OK to close the security screen.